Zone Terminal
13
Installation Procedures
Flat-head Screwdriver
Needle-nose Pliers
Drill
The ZT unit measures 6.88 x 7.31 x 1.52 in. (175 x 186 x 39 mm), and
weighs 1.25 lb (.57 kg). A coiled, 6-pin telephone-type cord is included.
The cord is 17 inches long and stretches to 5 feet. The ZT contains a five-
year lithium battery.
The Wall Mount Base with ZT measures 6.94 x 7.44 x 2.00 (176 x189 x
51 mm).
The Utility Mount Base with ZT measures 6.94 x 7.44 x 6.00 (176 x 189 x
152) when mounted on the AS-ENC100.
Installation of the Zone Terminal must meet the following standards:
●
Ambient operating conditions: 32 to 122°F (0 to 50°C)
●
10 to 90% non-condensing relative humidity
●
86°F (30°C) maximum dew point
Notes:
Do not mount the Zone Terminal in a vibration area.
The atmosphere must be free of corrosive chemical vapors which
may damage electronic equipment.
●
Use mild soap and water with a soft cloth to wipe surfaces of the ZT
clean.
●
DO NOT immerse the ZT unit in water.
●
Wipe clean with pure isopropyl alcohol, if surface becomes
excessively dirty.
Tools Needed
Physical
Dimensions
Environmental
Information
Cleaning of ZT
Surfaces