JOHNSON CONTROLS
7
FORM 160.78-N1
ISSUE DATE: 5/30/2012
1
SECTION 1 - SHIPPING
GENERAL
This manual provides instructions for rigging and in-
stalling a YMC
2
Liquid Chilling Unit.
Chillers can be shipped as a single factory assembled,
piped, wired package, requiring a minimum of field la-
bor to make chilled water connections, condenser wa-
ter connections, refrigerant atmospheric relief connec-
tions, and electrical power connections. (Refrigerant
charges shipped separately unless optional condenser
isolation valves are ordered.)
They can also be shipped dismantled when required by
rigging conditions, but it is generally more economical
to enlarge access openings to accommodate the factory
assembled unit. Chillers that are shipped dismantled
MUST be field-assembled under the supervision of a
Johnson Controls representative, but otherwise instal-
lation will be as described in this manual.
COMPONENT COMBINATIONS
Figure 1
identifies the major components of the YMC
2
Chiller. The chiller is customized based on the selected
combination of Motor, Compressor, Evaporator, and
Condenser.
Table 1
lists all of the allowable combina-
tions.
TABLE 1 -
ALLOWABLE MOTOR / COMPRESSOR /
EVAPORATOR / CONDENSER COMBINATIONS
YMC2
Motor
Codes
Compressor
Codes
Evaporator
Codes
Condenser
Codes
M1
197DFAA
EA2510
CA2110
M1
197DFAA
EA2510
CA2510
M1
197DFAA
EA2514
CA2514
M1
205DFAA
EA2510
CA2110
M1
205DFAA
EA2510
CA2510
M1
205DFAA
EA2514
CA2514
FIGURE 1 -
YMC
2
CHILLER COMPONENTS
LD14022
