Figure 27: Saving the event
10. Select
Event 2
. See Figure 28. The screen resets to the
Event 2 Set Schedule
screen. The days
are preselected to match Event 1.
11. Select the
Occupancy Status
button for Event 2.
Figure 28: Selecting event 2 (left) and setting the occupancy status (right)
12. Select the
Time Set
button.
13. Set the time for Event 2 and press
Save
.
14. Press the back arrow to return to the
Scheduling
screen.
Overriding the Occupancy mode
About this task:
The TEC supports a manual override of all other schedule sources (for example, Schedule, Occu-
pancy BI, and temporary occupancy). To override the Occupancy Mode:
1. Press the
Menu
icon.
2. Press
Scheduling
3. Press
Schedule Options
.
4. Press
Manual Occ Mode
and select
Occupied
,
Unoccupied
, or
No Override
.
5. Press
Save
and the back arrow to return to the previous screen.
This option is also exposed to the BAS through the point OCCOVRD-MODE.
Enabling optimal start
About this task:
The TEC supports an advanced optimal start algorithm. The algorithm works in conjunction with a
local schedule to pre-heat or pre-cool the zone before scheduled occupancy periods begin, in order
TEC3000 Series On/Off or Floating Fan Coil Thermostats Installation Guide
38