Software Installation and Configuration
Figure 2:
Cable Connection
Warranty does not cover water damage caused to the connector. In order to avoid such damage, the
cap must be attached to the cable if it is not plugged in.
NOTE
Ensure that the cable or the cap is securely connected by twisting until they are firmly locked.
Connect the Sensor to a PC
Use a PC or Laptop running Windows 7 OS or higher. Review minimum system requirement at
https://partners.magosys.com/portal/downloads
under the documentation tab.
Following are the 3 available options:
n
Using a PoE injector connect the radar directly to a PC. Refer to
n
Using a PoE injector connect the radar to a switch (connected to the same LAN as the PC). Refer to
n
Using a PoE switch connect the radar directly to the switch (connected to the same LAN as the PC). Refer to
Chapter 2
10
