UL/ULC notes
Only model PGP9922 operating in the frequency band 912-919MHz is UL/ULC listed. The PGP9922
has been listed by UL/ULC for commercial and residential burglary applications in accordance
with the requirements in the Standards UL 634 and ULC/ORD-C634 for contacts and switches. For
UL/ULC installations use this device only in conjunction with compatible DSC wireless receivers:
HSM2HOST9, HS2LCDRF(P)9, HS2ICNRF(P) 9, HS2LCDRFPRO9, PG9920, and Qolsys IQPanel2, IQHub,
IQPanel4. After installation, verify the product functionality in conjunction with the compatible
receiver used.
Safety Instructions
Read the safety information before you install the equipment.
The detector shall be installed and used within an environment that provides the pollution degree
max 2 and over voltages category II in non-hazardous locations, indoor only. The equipment is
designed to be installed by SERVICE PERSONS only; (SERVICE PERSON is defined as a person having
the appropriate technical training and experience necessary to be aware of hazards to which that
person may be exposed in performing a task and of measures to minimize the risks to that person
or other persons).
W.E.E.E Product recycling declaration
For information regarding the recycling of this product you must contact the
company from which you originally purchased it. If you are discarding this
product and not returning it for repair then you must ensure that it is returned
as identified by your supplier. This product is not to be thrown away with
everyday waste.
Directive 2012/19/EU Waste Electrical and Electronic Equipment.
About PGP922
The PGP922 is a wireless PowerG two-way acoustic glass-break detector designed to detect the
breaking of framed glass mounted in an outside wall. This device is wall or ceiling mountable
and suitable for most types of window or door glass, including the following: plate, tempered,
laminated, wired, coated, and sealed insulating glass.
The device has the following features:
•
The device is fully pre-calibrated
•
Provides temperature and light level reports for PowerG control panels that support this
feature
•
Alarm and other data are forwarded to the control panel
•
Back-tamper protection
•
Periodic supervision message is transmitted automatically to the control panel at regular
interval
•
A bicolor LED lights whenever events are reported
•
Remote firmware upgrade
Limited Warranty
Digital Security Controls warrants that for a period of 12 months from the date of purchase, the
product shall be free of defects in materials and workmanship under normal use and that in
fulfilment of any breach of such warranty, Digital Security Controls shall, at its option, repair or
replace the defective equipment upon return of the equipment to its repair depot. This warranty
applies only to defects in parts and workmanship and not to damage incurred in shipping or
13
PGP922 Glass Break Detector Installation Guide
D-308652 PGP922 Rev.0
