Johnson Controls PENN ACT2, Technical Bulletin

Page: 114 / 116

Maestro Software
114
Generic I/O Screens
The following information is located on the I/O screens:
Generic Input Status Information:
(See Figure 35: Status Screen for Generic Input Parameters. )
• Input Logs • Input Status • Input Values
Generic Output Status Information:
(See Figure 36: Status Screen for Generic Output Parameters .)
•
Output Status
Analog Output Status Information:
(See Figure 37: Status Screen for Analog Output Parameters. )
• Current Percentage for
Analog Output 1
•
Current Percentage for
Analog Output 2
• Input Value for Analog
Output 1
•
Input Value for Analog
Output 2
Usage Parameter Status Information:
(See Figure 38: Status Screen for Energy and Water Usage Parameters. )
• Current Peak Time
• Current Peak Usage
•
Current Usage
• Current Total Usage
• Daily Peak
•
Daily Total
• Last Reset Date for Usage
• Monthly Peak
•
Monthly Totals
Generic Input Setpoint Information:
(See Figure 56: Input Parameters. )
•
Input Name
•
Input Type
•
Input Location
• Log Interval for Generic
Input
•
Offset for Input
•
Input High Alarm
•
Input Low Alarm
• Input Alarm Time Delays
• Pulse Setup for Input
•
Related Input Locations
•
Relation Between Inputs
Generic Output Setpoint Information:
(See Figure 57: Output Parameters. )
•
Output Name
•
Output Location
• Output Operation
• Control Input for Output
•
Output Schedule
•
Output Normal Setpoints
•
Output Alternate Setpoints
• Output Normal Time
Delays
•
Output Alternate Time
Delays
• Output Override Options
•
Output Phase Protection
Analog Output Setpoint Information:
(See Figure 59: Analog Output Parameters. )
•
Analog Output Target
•
Analog Output Deadband
•
Analog Output Gain
•
Analog Output High
Percent
• Analog Output Low
Percent
•
Analog Output Scan Rate
•
Control Input for Analog
Output