Johnson Controls Penn A421 Series Quick Start Manual Download Page 4

Technical specifications

Table 4: A421 Series Electronic Temperature

Control Technical Specifications

Specification

Description

Power

consumption

1.8 VA maximum

Supply power

Class 2: 108/110/115/120 or 208/230/240

VAC, 50/60 Hz
Type 1/IP20:
Operating: -40°F to 150°F (-40°C to 66°C), 0%

to 95% RH noncondensing
Shipping and storage: -40°F to 185°F (-40°C

to 85°C), 0% to 95% RH noncondensing

Ambient

conditions

Type 4X/IP66:
Operating: -40°F to 140°F (-40°C to 60°C)
Shipping and storage: -40°F to 140°F (-40°C

to 60°C)

Temperature

control range

-40°F to 212°F or (-40°C to 100°C)

Sensor type

A99 PTC temperature sensor, 1,035 ohm at

77°F (25°C)

Sensor offset

range

±5ºF or ±3ºC

Enclosure material Type 1: IP20 high-impact thermoplastic or

Type 4X: IP66 watertight, corrosion-resistant,

high-impact thermoplastic

Compliance

North America:

 cULus Listed; UL 60730, File

E27734, Vol. 1; FCC Compliant to CFR47, Part

15, Subpart B, Class B Industry Canada (IC)

Compliant to Canadian ICES-003, Class B

limits

Europe:

 CE Mark – Johnson Controls declares

that this product is in compliance with the

essential requirements and other relevant

provisions of the EMC Directive; Low Voltage

Directive.

Australia: 

Regulatory Compliant Mark (RCM)

The performance specifications are nominal

and conform to acceptable industry standards.

For application at conditions beyond these

specifications Johnson Controls shall not be liable

for damages resulting from misapplication or

misuse of its products.

Product warranty

This product is covered by a limited

warranty, details of which can be found at

www.johnsoncontrols.com/buildingswarranty.

Software terms

Use of the software that is in (or constitutes)

this product, or access to the cloud, or hosted

services applicable to this product, if any,

is subject to applicable terms set forth at

www.johnsoncontrols.com/techterms.

 Your use

of this product constitutes an agreement to such

terms.

Single point of contact

APAC

Europe

NA/SA

JOHNSON CONTROLS
C/O CONTROLS PRODUCT
MANAGEMENT
NO. 32 CHANGJIJANG RD NEW
DISTRICT
WUXI JIANGSU PROVINCE 214028
CHINA

JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY

JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA

Contact information

Contact your local branch office:

www.johnsoncontrols.com/locations
Contact Johnson Controls:

www.johnsoncontrols.com/contact-us

© 2020 Johnson Controls. All rights reserved. All specifications and other information shown were

current as of document revision and are subject to change without notice.

www.penncontrols.com

Summary of Contents for Penn A421 Series

Page 1: ...f 1 minute to 99 minutes The defrost interval can range from 2 hours to 24 hours or be set to 0 for no defrost interval You can also start or stop a defrost off cycle in two ways press the three button touchpad on the Advanced Menu or connect a momentary switch to the Binary Input BIN The A421 also provides sensor offset temperature setback adjustable anti short cycle delay and a restricted user a...

Page 2: ... nuisance overload outages on compressors and other inductive applications Adjustable sensor offset Adjust the displayed temperature to the actual sensed temperature Optional restricted adjustment mode Restrict the On Off adjustment to your defined temperature range Sensor failure mode Run the control continuously in the event of a sensor or sensor wire failure or to shut it down Backlight brightn...

Page 3: ...ensor Standard probe 2 in 5 1 cm with 19 7 ft 6 0 m PVC cable ambient operating temperature range 40ºF to 212ºF 40ºC to 100ºC Table 2 A99 Temperature Sensors Product code 1 Description A99BC 25C 1 1 PTC Temperature Sensor Standard probe 2 in 5 1 cm with 9 7 8 in 0 25 m high temperature silicon cable ambient operating temperature range 40ºF to 248ºF 40ºC to 120ºC A99BC 100C 1 PTC Temperature Sensor...

Page 4: ...ive Australia Regulatory Compliant Mark RCM The performance specifications are nominal and conform to acceptable industry standards For application at conditions beyond these specifications Johnson Controls shall not be liable for damages resulting from misapplication or misuse of its products Product warranty This product is covered by a limited warranty details of which can be found at www johns...

Reviews: