manualshive.com logo in svg

Johnson Controls NAE, Installing, Page: 1 / 22

Share
Download
Johnson Controls NAE Installing Download Page 1

Technical Bulletin

Issue Date

March 31, 2003

© 2003 Johnson Controls, Inc.

www.johnsoncontrols.com

Code No. LIT-1201161

Software Release 1.00

Installing the NAE/NIE

Installing the NAE/NIE...........................................................................2

Introduction......................................................................................................... 2

Key Concepts...................................................................................................... 3

NAE................................................................................................................................... 3

NAE Ports ......................................................................................................................... 5

LEDs ................................................................................................................................. 9

Specifications .................................................................................................................. 11

Batteries .......................................................................................................................... 12

Mounting Feet ................................................................................................................. 12

Installation Considerations .............................................................................................. 13

Mounting Space .............................................................................................................. 15

Correct Mounting Orientations ........................................................................................ 15

Wiring Considerations ..................................................................................................... 17

System RE-BOOT Switch ............................................................................................... 18

Detailed Procedures......................................................................................... 19

Mounting the NAE ........................................................................................................... 19

Installing the Data Protection Battery.............................................................................. 21

Wiring the NAE................................................................................................................ 22

Turning Off the NAE........................................................................................................ 22

Summary of Contents for NAE























Reviews:

No comments