Published in U.S.A.
www.johnsoncontrols.com
FXVMA Installation Instructions
8
Johnson Controls® is a registered trademark of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners. © 2009 Johnson Controls, Inc.
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
Technical Specifications
FXVMA
Product Code Number
LP-FXVMA##-#
Supply Voltage
20-30 VAC at 50 or 60 Hz (24 VAC Nominal), Class 2
Power Consumption
10 VA typical, 14 VA maximum
Power delivered to devices connected to the binary outputs (valves, relays, and similar
devices) is not included in this rating.
Ambient Operating Conditions
0 to 50°C (32 to 122°F)
Ambient Storage Conditions
-40 to 70°C (-40 to 158°F)
Terminations
6.3 mm (1/4 in.) spade lugs-except communications and 24 VAC power, which are screw
terminals
Controller Addressing
3-255 for N2
1-128 for BACnet MS/TP
Communications Bus
N2. For more information, refer to the
N2 Communications Bus Technical Bulletin
(LIT-636018)
.
BACnet MS/TP. For more information, refer to the
MS/TP Communication Bus Technical
Bulletin (LIT-12011034)
.
Mounting
Mounts to VAV box damper shaft using single set screw and to duct with single mounting
screw.
Actuator Rating
4 N·m (35 lb·in) minimum; Minimum shaft length = 44 mm (1 3/4 in.)
Dimensions
Width: 182 mm (7.2 in.)
Length: 182 mm (7.2 in.)
Height: 64 mm (2.5 in.)
Center of Output Hub to Center of Anti Rotation Slot: 160 mm (6.3 in.)
Weight
0.86 kg (1.9 lb)
Compliance
United States
–
UL Listed, File E107041, CCN PAZX, UL 916 Energy
Management Equipment
Canada
–
UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2
No. 205 Signal Equipment
–
Industry Canada Compliant, ICES-003
Europe
–
CE Mark, EMC Directive 89/336/EEC, in accordance
with EN 61000-6-3 (2001) Generic Emission Standard
for Residential and Light Industry and EN 61000-6-2
(2001) Generic Immunity Standard for Heavy Industrial
Environment, and the Low Voltage Directive 73/23/EEC
in accordance with EN 60730-1 (1999) Automatic
electrical controls for household and similar use.
BACnet International
–
Bacnet Testing Laboratories™
(BTL) 135-2004 Listed
BACnet Application Specific Controller (Pending)
The performance specifications are nominal and conform to acceptable industry standard. For application at conditions beyond these
specifications, consult the local Johnson Controls® office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication
or misuse of its products.