Johnson Controls KT-IP, Installation Manual, Page: 13 / 36

9
DN1670-2201
IP Link Installation Manual
methods, the KT-Finder and the Web Configuration Page, can be used when the PC has no EntraPass
application running.
WAN Configurations
When sites are distant from each other and protected by the router’s firewall, the public IP address
must be used for communication between EntraPass and the remote IP Link. The Network
Administrator must provide you the local and remote Public IP addresses. The local Internet Service
Provider (ISP) provides the public IP address.
Note: Kantech recommends the use of a Static or Reserved DHCP IP address for the remote IP Link
and the Gateway since the routers must be configured for port forwarding.
There are two WAN configurations for the IP Link:
Static IP Addressing
Use this type of addressing in an environment where the Network Administrator determines the IP
address for communication between EntraPass and the IP Link. Since the EntraPass application is at
the host site, you must use the KT-Finder to configure the IP Link.