Compliance specifications
The ioSmart card reader complies to the following standards approvals.
FCC
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits provide reasonable protection against harmful
interference in a residential installation. This equipment generates and uses radio frequency
energy and if the user fails to install and use it in accordance with the instructions, it may cause
harmful interference to radio communication. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
CE compliance
•
EN60950
: Information technology equipment. Safety. General requirements.
•
EN55022, Class B
: Information technology equipment. Radio disturbance characteristics.
•
EN300 330-1
: Electromagnetic compatibility and radio spectrum matters (ERM); short range
devices (SRD); radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop
systems in the frequency range 9 kHz to 30 MHz; part 1: technical characteristics and test
methods.
•
EN300 330-2
: Electromagnetic compatibility and radio spectrum matters (ERM); short range
devices (SRD); radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop
systems in the frequency range 9 kHz to 30 MHz; part 2: harmonized EN under article 3.2 of
the R&TTE directive.
•
EN301 489-1
: Electromagnetic compatibility and radio spectrum matters (ERM);
electromagnetic compatibility (EMC) standard for radio equipment and services; part 1:
common technical requirements.
•
EN301 489-3
: Electromagnetic compatibility and radio spectrum matters (ERM);
electromagnetic compatibility (EMC) standard for radio equipment and services; part 3:
specific conditions for short-range devices (SRD) operating on frequencies between 9 kHz
and 40 GHz.
UL Standards compliance
•
UL-294
(UL standard for access control equipment, USA).
Note:
Use only a UL 294 or UL 1076 listed power supply.
ioSmart Card Reader Installation Guide
44