Step 2—Keypad Operation Overview
4
Variable Speed Drives Series III
LIT-12012996—April 2018
www.johnsoncontrols.com
Left
Left Arrow:
•
Navigation button, movement to left when editing a parameter digit by digit.
•
Backs up one step.
Right
Right Arrow:
•
Enter parameter group mode.
•
Enter parameter mode from group mode.
•
Enter parameter whole edit mode when this parameter can be written.
•
Enter parameter bit by bit edit mode from whole edit mode.
•
Navigation button, movement to right when editing a parameter bit by bit.
OK
OK:
•
To clear all the Fault History if pressed for more than 5s (including 5s) in any page.
•
This button is used in the parameter edit mode to save the parameter setting.
•
To confirm the start-up list at the end of the Start-Up Wizard.
•
To confirm the comparison item in parameters comparison mode.
The following is the same with Right key:
•
Enter parameter whole edit mode when this parameter can be written.
•
Enter parameter group mode.
•
Enter parameter mode from group mode.
Stop/Off
Stop/Off:
This button operates as the motor stop button for normal operation and places the drive in the
off control location. The Default is for this button to always be active. It can be changed in
Parameter P4.1.3 to only when “Keypad” is selected as the control source.
•
Motor stop from the keypad.
•
Transitions drive into an Off control location preventing start from any control source.
Start/Hand
Start/Hand:
This button operates as motor start button for normal operation when the “Keypad” is
selected as the active control source, as well as selects the Hand control place location.
•
When Keypad is the reference place after hitting the start button, it will jump directly
to the Keypad Ref Screen.
•
Places drive into Hand Control place. Hitting start again if keypad is in the control
location will start the Drive.
Table 2. Keypad Buttons, continued
Icon
Button
Description
