manualshive.com logo in svg

Johnson Controls FX-DIS1710-0, Technical Bulletin

Share
Download
Johnson Controls FX-DIS1710-0 Technical Bulletin Download Page 19

FX-DIS Local Controller Display Technical Bulletin

19

4. For more details on a particular item, select the item and press Enter. The 

Focus page for the item appears. Figure 23 is an example for the Occupancy 
Schedule. 

5. Use the up/down arrow keys to navigate through the information.

6. Press Esc to return to the Main Menu.

Commanding Configured Parameters and Setpoints

To command configured parameters and setpoints:

1. Go to the Main Menu.

2. Select the Parameter/Setpoints option. A list of all configured parameters and 

setpoints appears.

3. Use the up/down arrow keys to select the parameter or setpoint (for example, 

analog or binary) that you want to command. 

4. Press Enter. The Focus page for the item appears with the Command option 

selected.

5. Press Enter to display the commands available to this parameter or setpoint. 

Figure 24 shows an example for the Command Pages.

OCC-SCHEDULE

Cancel

Command

Reliability

FI

G:

Oc

cS

ch

Out of Service

Occupied

False

Reliable

Figure 23: Occupancy Schedule Page

Command

Release

Adjust

Override

FI

G

:Cm

dS

el

Figure 24: Command Page

Summary of Contents for FX-DIS1710-0





























Reviews:

No comments

Brands by name

Popular brands

Load more brands