Johnson Controls FX-BTCVT Series, Commissioning Manual, Page: 13 / 14

Installing the Bluetooth Wireless USB Adapter
Note: We recommend that you do not install an external Bluetooth wireless adapter if Bluetooth is built in to your
computer. See
Bluetooth Quick Start Guide if Bluetooth is built in.
Note: The instructions to install the USB adapter may vary depending on the vendor of the USB Adapter. Before
installing the USB adapter, familiarize yourself with the vendor’s installation instructions.
Important: Do not plug in the USB adapter until prompted to do so. If you plug in the USB adapter before prompted,
see the
Troubleshooting section.
1. Close all programs and insert the USB adapter installation media. The installation program appears.
Note: If the installation does not start automatically, on the Start menu, click Run . In the field that appears,
enter the vendor setup program, for example D:\setup.exe (where D is the letter of your CD-ROM or
DVD drive).
2. Click Install Bluetooth Driver . The installation begins and the welcome screen appears.
3. Click Next . The License Agreement screen appears.
4. To accept the terms of the license agreement, click I accept the terms in the license agreement and click
Next . The Destination Folder screen appears.
5. Click Next . The Ready to Install the Program screen appears.
6. Click Install . The program installs.
Note: During the installation process, you may see a Driver Signature Notice dialog box saying no certification
program is in place for Bluetooth devices. If this appears, click
OK .
7. When the Bluetooth device not found dialog box appears, click Cancel .
Note: You may also be prompted to plug in your USB hardware, which starts the Found New Hardware Wizard.
Wait until the Windows Found New Hardware Wizard is complete before clicking
OK . If you are not
prompted to plug in the USB hardware, wait until the driver installation is complete before you plug in
the USB hardware.
Note: Depending on the adapter you install, you may be prompted to enter a security code. If so, click No and
follow the directions on the screen to enter the code manually. The code is labeled SK and is printed on
the back of the Bluetooth wireless adapter.
8. After the software has been successfully installed, click Finish to close the final window. A red Bluetooth icon
appears on the system tray.
9. Plug in the USB adapter. The Found New Hardware Wizard appears.
Note: Your computer may install the driver automatically without the Found New Hardware Wizard. If it does,
restart the computer (if prompted) and go to
Bluetooth Quick Start Guide .
10. Click Install from a list or a specific location and click Next . The Please choose your search and installation
options screen appears.
11. Click Search for the best driver in these locations and click Next . The Completing the New Found Hardware
Wizard screen appears.
12. Click Finish , and look for the white Bluetooth icon on the system tray. ( ).
13. Ensure that your Bluetooth device is connected to your computer (plug it in if not already prompted) and restart
your computer.
14. After restarting your computer, wait until you see the blue and white Bluetooth icon ( ) on your system tray.
15. See Bluetooth Quick Start Guide to set up your device.
13 FX-BTCVT Bluetooth ® Commissioning Converter Commissioning Guide