Bluetooth Quick Start Guide
This quick start guide leads you through the Bluetooth device setup for Windows 7. Your steps may vary depending
on the vendor of the Bluetooth wireless device and your operating system.
You must repeat steps 1–12 for each Bluetooth converter you set up, because each device is assigned its own COM
port.
Note:
The BTCVT Bluetooth Commissioning Converter used during this procedure should be the one that you
intend to use when uploading and downloading FX-PC controllers. This procedure allows your computer to
pair with the Bluetooth Commissioning Converter. You can pair with more than one Bluetooth Commissioning
Converter, but you can only connect to one converter at a time.
Locate your BTCVT Bluetooth Commissioning Converter.
Plug your BTCVT Bluetooth Commissioning Converter into the SA BUS port or the FC BUS port
on your FX-PC controller.
On the BTCVT, verify that the Power LED is green, and that the Fault LED is off.
3
FX-BTCVT Bluetooth
®
Commissioning Converter Commissioning Guide