![background image](http://html.mh-extra.com/html/johnson-controls/eda-8100/eda-8100_installation-sheet_2023696006.webp)
EDA-8100 Electric Damper Actuator
24 VAC Input Power
Clockwise 24 VAC
Control Signal
Counterclockwise
24 VAC Control Signal
Common
COM CCW CW PWR
FT1
FT2
FT4
FT3
FT6
FT5
FT7
Figure 7: Wiring Connections
3. Connect the leads to Terminal Block 1 (TB1) as shown in Figure 7.
1. Apply power.
2. Use the checkout procedure described in the controller instructions to
check the action of the actuator.
3. Run the actuator fully CW and CCW.
4. Verify that the damper blades fully open and close.
5. Install the plastic cover.
Checkout
Procedure