Johnson Controls DWCR2, User Manual, Page: 19 / 44

Wired Controller
DWCR2
15
3.7.
6
Save Function Setting
Enter
user function page
. P
ress “ “
∧
” or
∨
” button to select save function and
press “
＜
” or “
＞
” button to turn on or turn off save function. Press MENU button to
enter save function setting page.
Enter the
save function setting page
, and
press “
＜
” or “
＞
” button to select
cooling or heating limitation temperature. After selecting cooling or heating limitation
temperature, press ““
∧
” or
∨
” button to adjust limitation temperature value. After
setting, press MENU button to save the setting.
Note: When save function
is
set, auto mode cannot be set.
3.7.
7
This section left intentionally blank
3.7.
8
X-fan Function Setting
Enter user function page, press “
∧
” or “
∨
” button to select dry function option
,
and
press “
＜
” or “
＞
” button to turn on or turn off this function with auto saving.
Note:
①
This function is only available in cooling mode and dry mode;
② When this function is on, if the air conditioner is turned off, the indoor fan will
still operate at low speed for a while to
dry
the residual water inside the
unit
.