Enclosures
Use the following table to find the order enclosures
for use with the display.
Table 1: Enclosures with DIS1710 cutout
Product code number
Size (in.)
Description
PAN-ENC1620WDF4
PAN-ENC1620WDP4
16 x 20 x 6.62
PAN-ENC2024WDF4
PAN-ENC2024WDP4
20 x 24 x 9.25
PAN-ENC2424WDF4
PAN-ENC2424WDP4
24 x 24 x 9.25
PAN-ENC2436WDF4
PAN-ENC2436WDP4
24 x 36 x 9.25
Standard Johnson Controls
®
Enclosure with Cutout for display
PAN-ENC1620FMD4
16 x 20
PAN-ENC2024FMD4
20 x 24
PAN-ENC2424FMD4
24 x 24
PAN-ENC2436FMD4
24 x 36
Standard Johnson Controls Panel
Door with Cutout for display
Mounting
Location considerations
The display is mounted onto the front panel door of
an enclosure.
Mounting dimensions and physical
features
Refer to the following illustrations for the mounting
dimensions and physical features of the display.
Figure 1: DIS1710 Mounting Dimensions, mm/in.
Figure 2: DIS1710 physical features
Preparing the panel
The display is mounted onto the front panel door
of the enclosure. The panel door must have a
maximum thickness of 6-7/20 mm (1/4 in.). Also,
if the panel you intend to use lacks a presized
cutout, make the cutout 71 mm x 216 mm (2-2/3
in. x 8-1/2 in.). Refer to the following figure for the
recommended cutout location.
DIS1710 Local Controller Display Installation Instructions
2