Accessories
The following table provides the product code number and description for the CV series accessories.
Table 12: CV series controller accessories (order separately)
Product code number
Description
XPM Series Expansion Modules
Refer to the
Metasys CGx, CVx Equipment Controllers and XPM Expansion Modules
Product Bulletin (LIT-12013105)
for a complete list of available XPM series
expansion modules.
IOM Series Controllers
Refer to the
Metasys System Field Equipment Controllers and Related Products
Product Bulletin (LIT-12011042)
for a complete list of available IOM Series
Controllers.
TL-CCT-0
License enabling
Metasys
Controller Configuration Tool (CCT) software for one
user
MS-FCP-0
License enabling
Metasys
Equipment Controller Firmware Package Files required
for CCT
Mobile Access Portal (MAP) Gateway
Refer to the
Mobile Access Portal Gateway Catalog Page (LIT-1900869)
to identify the
appropriate product for your region.
MS-DIS1710-0
Local Controller Display
NS-ATV7003-0
Handheld VAV Balancing Tool
NS Series Network Sensors
Refer to the
NS Series Network Sensors Product Bulletin (LIT-12011574)
for specific
sensor model descriptions.
AS-CBLTSTAT-0
Cable adapter for connection to 8-pin TE-6700 Series sensors
NS-WALLPLATE-0
Network Sensor Wall Plate
WRZ Series Wireless Room Sensors
Refer to the
WRZ Series Wireless Room Sensors Product Bulletin (LIT-12000653)
for
specific sensor model descriptions.
WRZ-7860-0
Refer to the
WRZ-7860 Receiver for One-to-One Wireless Room Sensing Product
Bulletin (LIT-12011640)
for a list of available products.
WRZ-SST-120
Wireless System Survey Tool (for use with the lower power 10mW WRZ and
WRZ-7860 systems)
Refer to the
WRZ-SST-120 Wireless Sensing System Tool Installation Instructions
(LIT-24-10563-55)
for usage instructions.
WRG1830/ZFR183x Pro Wireless Field Bus System
This system is used for installations that support BACnet/IP but can also coexist
with the ZFR1800 Series when installed under the same supervisor such as a
network engine.
Refer to the
WRG1830/ZFR183x Pro Series Wireless Field Bus System Catalog Page
(LIT-1901026)
for a list of available products.
Y64T15-0
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 92 VA, Foot Mount,
72.2 cm (30 in.), Primary Leads and 76.2 cm (30 in.) Secondary Leads, Class 2
Y65A13-0
Transformer, 120 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount (Y65AS),
20.32 cm (8 in.), Primary Leads and 76.2 cm (30 in.) Secondary Leads, Class 2
Y65T31-0
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount
(Y65AR+), 20.32 cm (8 in.), Primary Leads and Secondary Screw Terminals, Class 2
Y65T42-0
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Hub Mount
(Y65SP+), 20.32 cm (8 in.), Primary Leads and Secondary Screw Terminals, Class 2
ACC-TBKPWFCSA-0
Power, FC Bus, and SA Bus terminal block replacement kit for SNC, CGM, CGE,
CVM, CVE, and XPM products. Kit includes 5 of each terminal block type. 15
terminal blocks in total.
ACC-TBKINOUT-0
Input and Output terminal block replacement kit for SNC, CGM, CGE, CVM, CVE,
and XPM products. Kit includes 5 of each 2, 3, and 4 position Input and Output
terminal blocks. 30 terminal blocks in total.
M4-CV Series VAV Box Controllers Installation Guide
20
