Signal Words
Indicates a hazardous situation that, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation that, if not avoided, could result in minor or
moderate injury.
Indicates information considered important, but not hazard-related
(for example, messages relating to property damage).
General Precautions
To reduce the risk of serious injury or death, read these instructions
thoroughly and follow all warnings or cautions included in all manuals that
accompanied the product and are attached to the unit.
Refer back to these safety instructions as needed.
●
This system, should be installed by personnel certified by Johnson Controls, Inc. Personnel must
be qualified according to local, state and national building and safety codes and regulations.
Incorrect installation could cause leaks, electric shock, fire or an explosion. In areas where Seismic
Performance requirements are specified, the appropriate measures should be taken during
installation to guard against possible damage or injury that might occur in an earthquake. If the unit is
not installed appropriately correctly, injuries may occur because of a falling unit.
●
Use appropriate Personal Protective Equipment (PPE), such as gloves, protective goggles and
electrical protection equipment and tools suited for electrical operation purposes.
●
When transporting, be careful when picking up, moving and mounting these units. Although the
controller may be packed using plastic straps, do not use them for transporting from one location to
another. Do not stand on, or put any material on, the controller.
●
When installing the controller cabling to the units, do not touch or adjust any safety devices inside
the indoor or outdoor units. All safety features, disengagement, and interlocks must be in place
and functioning correctly before the equipment is put into operation. If these devices are improperly
adjusted or tampered with in any way, a serious accident can occur. Never bypass or jump-out any
safety device or switch. Use only Johnson Controls’ recommended, provided as standardized, or
replacement parts.
●
Johnson Controls will not assume any liability for injuries or damage caused by not following steps
outlined or described in this manual. Unauthorized modifications to Johnson Controls products are
prohibited as they…
◦
May create hazards which could result in death, serious injury or equipment damage.
◦
Will void product warranties.
◦ May invalidate product regulatory certifications.
◦
May violate OSHA standards.
1. Safety Summary
2
