Connecting the AS100 Audio Station
The
AS100
(accessory item) is a 2-way audio station
that include a speaker and a microphone.
By means the
AS100
:
Ø
the Installer can record and playback the Voice Mes-
sages (refer to “2.1 Voice Message Recording” in the
“KEYPAD OPERATION” section);
Ø
the User can perform some audio functions by a re-
mote
telephone
(refer
to
“OPERATING
THE
SYSTEM FROM A TELEPHONE” in the User Man-
ual);
Ø
the user can have an audio feedback on the security
system status (refer to “Event and Actions” in the
“PROGRAMMING FROM THE PC” section).
Ø
the Central Station operator can perform an audio
verification of the alarm event.
+
This Control Panel support ONE AS100.
Refer to the diagram in Figure 22 for the connection of
the AS100 to the Control Panel’s Main Board.
Connecting the transceiver
To use BW wireless devices, connect the transceiver to
the control panel, as shown in Figure 23.
!
Remove all power (AC, DC, telephone lines)
from the system while connecting modules to
the Transceiver Bus.
+
The transceiver must be enrolled on the control
panel before any BW wireless devices can be
used. For more information, see “Wireless Module
> General” on page 45.
Read the transceiver instructions for more information.
ABSOLUTA Plus
INSTALLING
35
S
M
B
R
AS100
RED
Control Panel
BLK SPKMIC
Yellow
White
Black
Red
Figure 22
Connecting the AS100 to the control panel.
Transceiver
GRN
RED
YEL
BLK
G
R
Y
B
Control Panel
Figure 23
Connecting the transceiver to the control
panel.
