You are now at the Accessory Info screen in the Menu.
The status of the thermostat will show that it is
‘connected’ to the Wi-Fi LAN.
The ID on this screen will be needed to create an account to
establish a successful connection to Skyport Cloud Services.
To create an account to monitor and control your thermostat, you must now use a computer and
go to
jci.skyportcloud.com
.
Click on the Skyport button located on the home page to set up your account and complete your installation.
For the most current instructions, consult
http://cgproducts.johnsoncontrols.com/default.aspx
Package Contents: 1) Skyport Wi-Fi Key, 1) Locking Clip, 1) Instruction Sheet
This device must be installed properly and operated more than 20cm from the human body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 3 conditions: (1) this
device may not cause harmful interference, (2) this device must accept any interference received, including
interference that may cause undesired operation, and (3) changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to operate the equipment.
Thermostat Wi-Fi Key
model
ACC-WIFI
LIT-12011970 rev. 1
jcithermostats.com
If the network requires security, press
Password
, and enter the password on
the keyboard and press
DONE
. If no
security is required,
Password
will
not appear. Press
NEXT
to continue.
8
