Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 133 / 270

Program Settings
Z370584 Rev. D Program Settings
6-11
10. Bottle Height Hold : If this checkbox is checked (enabled), the bottle height is held at the
Bottle Height value specified in the Vitrectomy submode.
11. Tap Save to save the program.
Diathermy (DIA)
1.
Tap to open the Settings screen.
2. Select a Diathermy submode on the left ( Figure 6-9 ).
Figure 6-9 — Diathermy Power Submode
3. If desired, tap the submode name at the top of the screen (outlined in red in Figure 6-9 ) to
customize the submode name.
4. Use the up and down arrows to set the Power (5% to 100%).
5. Select the delivery mode ( Linear , Panel , or Burst ).
6. Tap Save to save the program.