www.johnnyseeds.com
2
9414.999
Rev
1.0
‐
4/14
‐
AL
Step 1:
Remove hinge bolts (J) and hinge
flap (K) from bottom assembly (F).
Step 5:
Insert handles (A) into
their respective shafts
(C & I) and slide
seedling chute (G)
into bottom assembly
(F). Adjust handles
(A) as desired for
height and tighten
strap bolt (B) and
handle bolt (H) to
complete assembly.
Step 2:
Attach pivot
shaft (I) to
hinge flap (K)
using two
shaft bolts (E)
as shown.
Step 3:
Attach strapped shaft (C)
and depth control stop plate
(D) to outside of bottom
assembly (F) with two shaft
bolts (E). Nuts should face
out.
Note: Depth control stop
plate is adjusted for desired
planting depth by sliding up
& down along the bottom
shaft bolt.
Step 4:
Re-attach hinge
flap (K) to bottom
assembly (F) using
the hinge bolts (J)
removed in step
one. Do not tighten
completely. Pivot
shaft (I) and hinge
flap should move
smoothly on hinge
bolts.
J
K
I
K
E
C
D
E
F
K
J
F
G
C
I
A
A
I
B
H
Operation:
- Hold handles apart.
- Plunge to the depth stop.
- Push handles together.
- Drop transplant into the chute.
- Lift the tool straight up.
- Firm soil around the transplant with a foot.
- One person operates the tool, another handles the transplants.
- Follow up with some water and you are done.
Cautions:
- Operator should wear steel toed shoes, especially if edges are sharpened for use through thicker
mulch covers.
- Tools should be kept away from children. Sharp edges and pinch points. Please be careful.
Made in Taiwan
Patent #6,659,028 B1
