SILENZIO
- 10 -
User Guide
BASIC TECHNICAL DATA
DISPOSAL THE UNIT
Model:
SILENZIO
Voltage:
120
V, 60
HZ,
10
A
- 1
2
00 W
APPLIANCES THAT ARE MARKED WITH THIS SYMBOL MUST BE DISPOSED OF SEPARATELY FROM
HOUSEHOLD GARBAGE. THESE APPLIANCES CONTAIN VALUABLE RAW MATERIALS THAT CAN BE
RECYCLED. PROPER DISPOSAL PROTECTS THE ENVIRONMENT AND THE HEALTH OF YOUR
FELLOW MEN. YOUR COMMUNITY GOVERNMENT OR YOUR DEALER CAN PROVIDE INFORMATION
ABOUT PROPER DISPOSAL.
IMPORTANT:
This motor is equipped with a motor protective thermostat. If for some reason the vacuum
cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur
unplug the vacuum cleaner from the wall outlet and turn off switch, change dust bag and clean
filters. Allow the unit to cool for approximately 1 hour. To restart, replug into wall outlet and turn
switch back on.
CHANGE DUST BAG
1. Open the front cover.
2. Change dust bag.
3.
Be carefult not to throw away the bag holder at the same time,
it will be needed when
installing the new bag.
1
2
3
CARRY AND MOVE AWAY THE CLEANER
NOTE:
This cleaner have a special feature for handle. The carry-handle is in front. You can use it to
conveniently carry the cleaner in a vertical position.
REMOVING & CLEANING PRE-MOTOR FILTER
AND AIR OUTLET FILTER
WARNING:
Always unplug the unit from electrical outlet before getting out the dust barrel.
A. Pre-motor filter
1. Open the front cover.
2. Clean or change filter.
1
2
B. HEPA filter
1. Open the front cover.
2. Take out the air outlet filter to clean or change.
1
2
PLEASE NOTE:
The sponge filter material in the cleaner will became dusty over time. This is normal and will not
affect the performance of the filter. If the sponge filter is so dusty that suction does not return to
100%, then we suggest that the motor filter be removed then and rinsed under the faucet and
allowed to dry for 24 hours by airing not near the fire or some high temperature objects before
refitting into the vacuum. This should be done once every six months or when suction appears to
be reduced.
It is recommended to change the HEPA filter once a year or as soon as it is damaged.
IMPORTANT:
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will
overheat and could become damaged.
