INSTALLATION AND SETTING OF THE BRUSH :
For your safety, first ensure that the machine is on a lflat surface.
Never work without the brush being perfectly installed.
Install brush or change pads :
1. Lower the cleaning head pedal so that the brush protection hood rises slightly (see Figure 6).
2. Place the brush in front of the machine and centre it with the guard (Figure 7). Lower the pedal again so
that the guard falls down on the brush. If the brush is properly centered, a slight pressure from the control
lever (Figure 8) should be sufficient to engage it. Otherwise, all you have to do is do it manually, taking care
to make sure that the two parts coincide and doing a slight rotation until they snap properly.
NOTE :
To remove the brush or pads, do the opposite as above or do it manually.
- 14 -
User Guide
JVC50BCN
M A C H I N E I N S TA L L AT I O N
Figure 6
Figure 7
Figure 8