background image

JV252

- 4 -

User Guide

SAFETY PRECAUTIONS

1.  This appliance can be used by children aged from 8 years and above and persons with 

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they 
have been given supervision or instruction concerning use of the appliance in a safe way and 
understand the hazards involved. Children shall not play with the appliance. Cleaning and 
user maintenance shall not be made by children without supervision

2.   This appliance is designed for domestic use only.
3. 

DO NOT

 pull on the connection cord, but rather on the plug, to separate the appliance from 

the main socket.

4. 

DO NOT

 use outdoor.

5. 

DO NOT

 leave the appliance unattended when it is switched on, as this may be a source of 

danger.

6.  Stand the appliance on a table or flat surface.
7.  If the power cord is damaged, it must be replaced by the manufacturer, its service agent or 

similarly qualified persons in order to avoid a hazard.

8.  Following objects are strictly banned, otherwise the vacuum cleaner will be damaged or fire 

calamity will be caused, which bring such accidents as human body injuries: • 

DO NOT

 pick 

up large or sharp broken such as glasses, • 

DO NOT

 pick up harming or erodent liquids 

(solvent, corrosive, detergent…), • 

DO NOT

 pick up inflammable or explosive substance 

such as gasoline or alcohol.

9.  Check the device and connections regularly for visible damage. The device must not be used 

if the housing is damaged or other damage is present.

10.  Never attempt to open the device or the main adapter yourself or to replace the connecting 

cable. Always have repairs to the device carried out by a specialist workshop. There is 
considerable danger to the user if repairs are faulty.

11. 

DO NOT

 trap the main adapter cable and when using the adapter, pay attention to where the 

cable is to prevent any danger of tripping over it. Keep the cable away from heated surfaces 
(e.g. cooker surfaces).

12. 

DO NOT

 touch the main adapter and cable with wet hands.

13. 

DO NOT

 point the vacuum cleaner at persons or animals when in operation.

14.  Only use the main adapter on dry surfaces in buildings.
15.  Only use the device with the accessories supplied.
16.  Please keep these instructions in a safe place.
17.  Use only with the provided adaptor.
18. The appliance must only be supplied at safety extra low voltage corresponding to the 

marking on the appliance.

19.  This appliance includes Li-ion batteries; 

DO NOT

 incinerate the batteries or expose to high 

temperatures, as they may explode.

20.  This appliance can only charged with the adaptor delivered together 

Summary of Contents for JV252 Supercharged

















Reviews: