© John GmbH
page 15/20
2)
Mounting drawbar
Mount the drawbar at JOSI-Wismi (see also
chapter Front wheel and adapter).
Attention!
The pull catch / fastener must be additionally
fastened by rotating in the direction of the
arrow after it has snapped into place.
3)
Connecting Weber clutch
Use the Weber clutch to link the drawbar to your
bike (see Weber clutch instructions for use).
Attention!
Read the Installation Instructions for the
Weber coupling and strictly obey them.
4)
Fasten the safety line
Connect the safety line using the mounted belt
strap.
Attention!
Pass the belt trap through the frame of JOSI-
Wismi.
5)
Mounting safety kit
Mount the following components:
1 reflector white, front side:
right-hand traffic: left side
left-hand traffic:
right side
1 rear bike light red, back side:
right-hand traffic: left side
left-hand traffic:
right side
1 reflector red, back side:
right-hand traffic: right side
left-hand traffic:
left side
1 safety flag
Please note:
Attach the safety flag below the suspension
mount on the frame (see picture).
Attention!
Observe the enclosed instructions for use of
the individual components of the safety kit.