Step Three
Take the centre support (
08
) and attach the middle feet (
10
) as shown per diagram below.
Step Four
Fittings
(
B
) must be screwed into the pre drilled cams of the middle support (
05
).
Attach the center support rail (
08
) onto the support brackets, push firmly downwards to secure in
place. Attach the middle support rail (
05
) into the support brackets (
02
) and (
03
).If cams don’t
lock into the place, please use a screw driver to adjust them.
Tighten the middle support
(05)
with the screw driver. Please adjust the legs individually
according to the floor level on (
02
) and (
03
).
Please adjust the middle feet according to the floor level as per picture below.
Summary of Contents for St. Ives 80343003
Page 3: ......
