Step Five
Step Six
Insert the Front Legs (6)x2 into the pre-drilled holes on the underside of the Headboard (1) and twist to secure, as
shown in the diagram below.
Legs x 2
G.
6.
Nut M8 (2)
Spanner M13 (1)
Screw
3.5 x 30mm (2)
M6 X 25mm Bolt (4)
6
Legs (2)
15.
Metal plates (2)
Spring
Washer M8 (2)
A.
M4 Allen Key (1)
Fo
r
Hea
db
oa
rd
O
n
l
y
5/8
3
1
J.
K.
L.
Attach the Metal Plate (15) to the bottom of the Footboard (2) using Bolts M6 X 25mm (G)x2. Do not tighten the bolts
until you make adjustment for the screw hole at the Side Rail (3). Insert Wooden Leg (6) into the bottom of the
Metal Plate (15) using Spring Washer M8 (E) and Nut M8 (K). Hold the Nut M8 (K) using Spanner M13 (L) and twist
the Wooden Leg (6) to secure in place. Repeat for other leg.
E.
6.
x2
For Footboard Only
M6 x 25mm (G)
1
7
M4 (A)
M6 x 25mm (G)
M6 x 25mm (G)
1
M4 (A)
M6 x 25mm (G)
7
3.5 x 30mm (J)
3.5 x 30mm (J)
Spanner M13 (L)
Nut M8 (K)
Spring
Washer M8 (E)
15
6
1
STEP 1
STEP 2
Yellow sticker
face down
AFTER INSERTING BOLT M6 x 25MM,
MAKE ADJUSTMENT FOR SCREW HOLE,
THEN INSERT THE SCREW 3.5 X 30MM.
TIGHTEN THE BOLT M6 x 25MM
FIXINGS FULLY.
TWIST WOODEN LEG ONLY
WITHOUT MOVING THE M8 NUT,
SPRING WASHER AND SPANNER
Twist the wooden leg
3
3
3
