Step Four
Step Five
Step Three
Step Six
pole
centre
10.5mm
=
=
10.5mm
28mm Bracket
19mm Bracket
28mm Bracket
19mm Bracket
10cm
10cm
10cm
z
z w
w
z
z w
w
3
2
3
2
1
Bend
Bend
3
2
3
2
1
Bend
Bend
10cm
10cm
10cm
z
z w
w
z
z w
w
3
2
3
2
1
Bend
Bend
3
2
3
2
1
Bend
Bend
90
º
Note - Diagram for ceiling installation
Note -
1
may be made of
two lengths of poles which
will require a centre joint.
Starting in the middle of the window, build the pole outwards cutting the poles to length as
required.
1. To achieve a smooth glide of your curtain, ensure that each
joint is evenly bent.
The maximum bend angle for a 19mm and 28mm bay bend
is 90 °.
2. When you are happy with the bend profile, tighten the
screws to lock it into position.
1. Slide the bracket onto the wall mounting plate,
ensuring that the base of the bracket is flush with
the wall.
2. Tighten the locking screw.
Cutting pole
1. Mask the area to be cut to avoid
damaging the pole.
2. When using two poles, cut equal
lengths from each pole.
3. File sharp edges and the inside of the
cut poles to remove burr and to avoid
injury or damage to other components.
1. Join the corners to the pole by pushing the
bung into the pole.
2. Place the pole and bend onto the passing
bracket.
Use the wall mounting plate as a template to mark the hole positions.
