John Lewis Outdoor Moroccan User Manual Download Page 2

Thank you for purchasing this set of Outdoor Moroccan Line Lights. Please read the instructions
carefully before use to ensure safe and satisfactory operations of this product.

 

Before using the light set for the first time, we would recommend you charge
the product for 2 full days (turning off at dusk).

Warnings

This product is for temporary outdoor use.
Do not connect the light set electrically to any other light set.
If required, only replace the rechargeable battery with the recommended type supplied (1 x 
1.2V AA Rechargeable 400 mAh Battery).

 

This symbol       indicates that batteries should not be disposed of in the normal household
waste, but taken to appropriate local recycling facilities, where and when these are available.
Never throw batteries in a fire or attempt to open the outer casing.

 

 

Parts List

A

B

x 1

x 1

Care instructions

We recommend cleaning with a soft, dry cloth. Do not use abrasive materials, as these
will damage the finish.

Assembly

Please ensure you remove all packaging from the product before positioning outside. Peel 
off the protective film that is covering the solar panel.
Position the solar panel in direct sunlight and where it will be exposed for the longest time.
Don’t position the solar panel where there are shadows from buildings, trees or other foliage,
as this will reduce the charging performance.

1. 

Attach the sharp part of the stake “C” to the solar panel end of the stake “B”.  

2.

 To avoid damaging the solar panel, install the ground spike “B+C” into soft ground first, then slide

the solar panel onto the spike, ensuring it ‘clicks’ securely in place.  

3.

 For continuous operation, turn the product on using the push switch, located on the under

side of the solar panel (see below diagram). The lights will automatically switch on at dusk 
and recharge during the day.

4.

 When hanging the product ensure they are being hung from a secure location and the full 

length of cable has been unravelled, whilst also ensuring the cable will not present a trip or 
safety hazard.

5.

 Should you require to replace the battery, you can access the battery box on the bottom

of the solar panel. You will need a small phillips screw driver. Remove the screws from the
underside of the solar panel. 

6.

 Only replace the rechargeable battery with the recommended type: 1 x 1.2V AA Ni-Mh 400

mAh Battery. Securely re-screw all screws back into their housings.
Full charge will last up to 6-8 hours per day.   

 

 

C

x 1

6.

ON/OFF

ON/OFF

5.

1.

2.

3.

4.

ON/OFF

ON/OFF Switch

Reviews: