background image

Page 16

NAN 04/14

Wood

If fixing to wood
make sure that it
isn't chipboard as
screws can easily
pull away from the
core structure

Brick or Masonry

Use an appropriate
wall plug provided you
are sure your wall is
sound.

Cavity wall

Special toggle
wall plugs are
needed. Seek
expert advice.

Wall fixing - if in doubt seek professional advice

Care and Maintenance

Safety Instructions

This product has been manufactured using modern manufacturing methods  and materials.   

To keep your product, looking  at its best, we strongly recommend  either dusting with a soft cloth,  or
the use of a damp (not wet ) cloth and water containing no more than a 5% soap solution. 
Dry  with a soft clean cloth.

Aggressive chemicals, such as wax furniture polish, abrasive cleaners, bleach or hypochlorate (chlorine)
based cleaners, multi purpose cleaners, dilutes, acetone, alcohol and  solvent based liquid product should
NOT be used, as may result in damage.

Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.

It is recommended that before moving a heavy object to a new location it is completely dis-assembled to avoid
personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.

This product is designed to be fixed securely to a sound wall in the manner stated.
It must under no circumstances be used free-standing.  No liability will be accepted for damage or injury caused by
inadequate fixing or use without fixing.

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

John Lewis Partnership 171 Victoria Street London SWIE 5NN
www.johnlewis.com

Summary of Contents for Napoli 80310606

















Reviews: