5
1.
Take the Centre beam ‘B’ and lay onto the two brackets ‘A’ positioned on the head and foot
boards. Use the allen keys provided to secure in place from beneath with bolt ‘C’ and
washer ‘I’ at both ends.
2.
Apply 5x sticky back pad ‘D’, evenly spaced along the length of the centre beam ‘B’.
Step 6
1.
Place 1x rubber washer ‘F’ onto each of the 4 brackets ‘A’ positioned on the side rails and
lower the assembled slatted base into the bed frame. Align holes on the steel bed base with
the holes on brackets ‘A’.
2.
Insert bolt ‘E’ with washer ‘I’ on top and bottom, followed by washer ‘G’ and hand tighten
with wing nut ‘H’.
Care and Maintenance
D
B
B
I
C
E
I
I
G
H
F
