The drain pump can operate
shortly before the appliance fills
water.
Starting a programme with
the delay start
1. Touch the Delay start button repeatedly until
the display shows the desired delay time. On the
display the indicator shows
.
2. Touch the Start/Pause button. The appliance
door locks and starts the countdown of the
delay start. The display shows the indicator
.
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Start/Pause button to pause the
appliance. The related indicator flashes.
2. Touch the Delay start button repeatedly until
the display shows and the indicator
goes
off.
3. Touch the Start/Pause button again to start
the programme immediately.
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Start/Pause button to pause the
appliance. The related indicator flashes.
2. Touch the Delay start button repeatedly until
the display shows the desired delay time.
3. Touch the Start/Pause button again to start
the new countdown.
The SensiCare System load
detection
After touching the Start/Pause button:
1. The SensiCare System starts estimating the
weight of the load to calculate the real
programme duration. During this phase the
Reduce time bars
placed below the time
digits play a simple animation.
2. After about 15-20 minutes the Reduce time
bars disappear and new cycle duration is
displayed.
The appliance automatically adjusts the
programme duration to the load to achieve
perfect washing results in the minimum
possible time.
Interrupting a programme and
changing the options
When the programme is running, you can
change
only some
options:
1. Touch the button Start/Pause.
The related indicator flashes.
2. Change the options. The given information in
the display changes accordingly.
3. Touch the button Start/Pause again.
The washing programme continues.
Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the appliance.
2. Press the button On/Off again to activate the
appliance.
If the SensiCare System has
completed and the water filling has
already started, the new
programme starts
without
repeating the SensiCare
System
. The water and the
detergent are not drained out in
order to avoid waste.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset"
position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing programme.
Washing Machine User Manual
26
