Troubleshooting
Problem
1)
Possible cause
Remedy
The tumble dryer
does not operate.
The tumble dryer is not connected to the
mains supply.
Connect to the mains socket. Check fuse in
fuse box (domestic installation).
The door is open.
Close the door.
The On/Off button was not pushed.
Push the On/Off button.
The Start/Pause button was not pushed.
Push the Start/Pause button.
The appliance is in standby mode.
Push the On/Off button.
Unsatisfactory dry-
ing result.
Incorrect programme selection.
Select a suitable programme.
2)
The filter is clogged.
Clean the filter.
3)
The Dry plus option was set to mini-
mum.
4)
Change the Dry plus option to the moder-
ate or maximum level.
4)
The load was too large.
Do not exceed the maximum load size.
The airflow grill is clogged.
Clean the airflow grill at the bottom of the
appliance.
Dirt on the humidity sensor in the drum.
Clean the front surface of the drum.
Dryness level not set to desired level.
Adjust the dryness level.
5)
The heat exchanger is clogged.
Clean the heat exchanger.
3)
The loading door
does not close
The filter is not locked into position.
Put the filter in the correct position.
Laundry is trapped between the door and
the seal.
Remove trapped items and close the door.
Err
(Error) on the
display.
You tried to change the programme or the
option after the start of the cycle.
Turn the tumble dryer off and on. Change
the programme or option as required.
The option you tried to select is not availa-
ble for the selected programme.
Turn the tumble dryer off and on. Change
the programme or option as required.
Tumble Dryer User Manual
25
