John Lewis JLTDC12, Instruction Manual

Page: 14 / 32

1. Turn the programme selector to the
Time programme. The flashing 10' above
the Time button is on.
2. Press the Time button repeatedly until
the desired programme duration is
shown in the display, e.g. 20 for a
programme of 20 minutes.
If the programme duration is not selected,
the duration is automatically set to 10 mins.
Delay start
With the Delay start button, you can
delay the start of a programme by
between 30 minutes (30') and a
maximum of 20 hours (20h).
1. Select the programme and additional
functions.
2. Press the Delay start button as many
times as necessary until the required
Delay start appears on the display, e.g.
12h if the programme is to be started in
12 hours.
If the display is showing 20h and you
press the button again, the time delay
will be cancelled. The display will
show 0'and then the duration of the
selected programme.
3. To activate the delay timer, press the
Start/Pause button. The amount of time
remaining until the programme is set to
start is continuously displayed (e.g. 15h,
14h, 13h, … 30' etc).
Setting child lock
The child lock can be set to prevent a
programme being accidentally started or a
programme in operation being accidentally
changed. The child lock function locks all
buttons and the programme selector. The
child lock can be activated or deactivated by
holding down the
Extra delicate and Intensive
buttons simultaneously for 5 seconds.
– Before programme is started:
Appliance cannot be used
– After programme is started:
Programme in operation cannot be
changed
The icon appears in the display to
indicate that the child safety device is
activated.
The child safety device is not deactivated
once the programme comes to an end.
If you want to set a new programme, you
must first deactivate the child safety device.
14