John Lewis JLDWS 1208, Instruction Manual

Page: 8 / 36

The digital display
The digital display indicates:
• The level of hardness to which the
water softener is set,
• The approximate remaining time of
the running programme,
• Activation/deactivation of the rinse
aid dispenser ( ONLY with Multi
tab function active),
• The end of a washing programme
(the digital display shows zero),
• The countdown of the delay start,
• Fault codes concerning malfunction
of the dishwasher,
• Activation/deactivation of the
audible signals.
Function buttons (A, B, C,
D and E)
The following functions can be set using these
buttons:
• Setting the water softener level,
• Cancelling a washing programme or a delay
start in progress,
• Activation/deactivation of the Multi tab
function,
• Activation/deactivation of the rinse aid
dispenser when Multi tab function is active,
• Activation/deactivation of the audible
signals.
Setting mode
Press the On/Off button; if ALL programme
button lights come on the appliance is in
setting mode.
Always remember that when
performing the following operations:
• Selecting a washing programme,
• Setting the water softener,
• Activating/deactivating the rinse aid
dispenser,
• Activating/deactivating the audible
signals,
the appliance
MUST
be in setting
mode.
Press the On/Off button; if a programme
button light comes on the last performed or
selected programme is still set.
In this case, to return to setting mode, the
programme has to be cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two
function buttons
B and C until all the
programme button lights come on.
The programme has been cancelled and the
appliance is now in setting mode.
Audible signals
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing:
–
Setting of the water softener,
–
End of programme
– Intervention of an alarm due to
malfunction.
Factory setting: audible signals activated.
It is possible to deactivate the audible
signals, using the function buttons on
the control panel.
1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Simultaneously press and hold function
buttons B and C , until the lights of
function buttons A , B and C start flashing.
8