John Lewis JLBIOS609, User Information

Page: 42 / 60

42
Pyrolytic cleaning
1
Warning: During this process the
oven gets extremely hot. Keep children
away.
1
Important Before carrying out the Py-
roluxe process, all removable parts, in-
cluding the side rails, must be removed
from the oven.
3
If you use the oven shelf runners that
are available as special accessories,
these must be
removed before pyro-
lytic cleaning .
If the side rails or oven shelf runners
are still in place, ‘C1’ appears in the
clock display.
The pyrolytic cleaning process then can-
not be started due to a safety cut-out
that protects the side rails/oven shelf
runners.
If ‘C3’ appears in the clock display, pyro-
lytic cleaning does not start. Close the
oven door properly.
Pyrolytic cleaning
1. First remove the worst of the residue manu-
ally.
2. Select oven function Pyroluxe .
– P2 appears in the temperature display.
–
“2:45” appears in the clock display
–
Cook time flashes for approx. 5 seconds
Pyrolytic cleaning then starts.
3
Do not open the oven door during the
heating up time, or the process is can-
celled.
3
The Light does not work.
When a pre-set temperature is
reached, the oven door is locked.
The symbol
is displayed and the
bars of the heat indicator are lit until
the door is unlocked again.
3
If the process is interrupted while the
door is locked, only pyrolytic cleaning
can be selected as the next function.
This only applies while the oven door is
locked.
Changing the length of time
1. Proceed as described in the section “Pyro-
lytic cleaning”.
2. As long as Cooking duration is flashing,
select the desired length for the process us-
ing
or :
–
2:15 for a light degree of soiling,
– 2:45 for a normal degree of soiling,
–
3:15 for a high degree of soiling.
Cooking duration flashes for approx.
5 seconds.
Pyrolytic cleaning then starts.
3
If Cooking duration is no longer
flashing, press the Time functions but-
ton again and then perform the setting
procedure.
3. When the pyrolytic cleaning is completed,
press any button to end.
Changing the switch-off time for the py-
rolytic cleaning
The switch-off time can be delayed using the
clock function End of cooking
(within 2
minutes of the pyrolytic cleaning starting).