John Lewis JLBIIH804, User Manual

Page: 10 / 32

Daily use
Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated ( ).
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). An acoustic signal sounds
some time and the appliance deactivates.
Remove the object or clean the control panel.
• The appliance becomes too hot (e.g. when, a
saucepan boils dry). Before you use the
appliance again, the cooking zone must be
cool.
• You use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deactivates. See
below.
• The relation between heat setting and times
of the Automatic Switch Off function:
•
, - — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
The heat setting
Touch to increase the heat setting. Touch
to decrease the heat setting. The display shows
the heat setting. Touch and at the same
time to deactivate the cooking zone.
Automatic Heat Up
1
2
3
4
5
6
7
8
9
10
11
0
1 2 3 4 5 6 7 8 9
You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up
function. This function sets the highest heat
setting for some time (see the illustration), and
then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch . The symbol comes on in the
display.
2. Immediately touch . The symbol
comes on in the display.
3. Immediately touch again and again until
the necessary heat setting comes on. After
3 seconds comes on in the display.
To stop the function touch .
10 Hob user manual