background image

Cooker hood user guide

8

Care, Cleaning and Servicing 

Note:

 Switch off and unplug the cooker hood before carrying 

out any cleaning or maintenance work.

Care and Cleaning

Clean the interior and exterior casing using a cloth with water 
and mild (neutral) detergent. 

Do not use abrasive cleaning materials or scouring pads when 
cleaning the cooker hood as this may damage the stainless 
steel 

fi

 nish.

Cleaning and Replacing Filters

This cooker hood is supplied with aluminium 

fi

 lters.

Aluminium Filters

Aluminium 

fi

 lters are designed to absorb grease and dust 

during cooking. They should be removed and cleaned at least 
once every two months, or more often if you regularly fry 
food.

The 

fi

 lters may discolour after a few washes. This is normal 

and does not mean they have to be replaced.

To clean the aluminium 

fi

 lters:

1  Open the panel (A).

2 Pull 

the 

fi

 lter out of the cooker hood (B).

3 Remove 

the 

fi

 lter from the holder (C).

4 Wash 

the 

fi

 lter in warm, soapy water or in a dishwasher 

and dry it.

5 Replace 

the 

fi

 lter in the holder and replace it in the cooker 

hood by pressing it into position.

6  Close the panel.  

Charcoal Filters (Not Supplied)

Charcoal 

fi

 lters are designed to absorb grease, dust and 

unwanted odours during cooking. 

Non-regenerable charcoal 

fi

 lters must be replaced at least 

every four months.

Unlike traditional charcoal 

fi

 lters, regenerable charcoal 

fi

 lters 

can be washed and re-used approximately 12-15 times before 
they have to be replaced. They should be washed at least 
once every 2-3 months.

To clean the charcoal 

fi

 lters:

1  Open the panel (A).

2 Pull 

the 

fi

 lter out of the cooker hood (B).

3 Remove 

the 

fi

 lter from the holder (C).

4  Either replace the 

fi

 lter (if non-regenerable), or (if 

regenerable) wash the 

fi

 lter in warm, soapy water or in a 

dishwasher at the highest dishwasher temperature.

5 Dry 

the 

fi

 lter in the oven at 100

°

C for 10-15 minutes to 

re-activate it.

6  Insert the reactivated 

fi

 lter in the cooker hood and press 

into position. 

7  Replace the brackets in the housing. 

8  Close the panel.

Replacement 

fi

 lters should be bought from authorised dealers.

A

Summary of Contents for JLBIHD923

















Reviews: