Caution! In the absence of
electricity you can ignite the
burner without electrical
device; in this case approach
the burner with a flame, turn
the control knob counter-
clockwise to maximum gas
supply position and push it
down. Keep the control knob
pushed for equal or less than
10 seconds to let the
thermocouple warm up.
If the burner accidentally goes out,
turn the control knob to the off
position and try to light the burner
again after minimum 1 minute.
The spark generator can start
automatically when you switch on
the mains, after installation or a
power cut. It is normal.
The hob is supplied with the
progressive valves. They make the
flame regulation more precise.
Turning the burner off
To put the flame out, turn the knob to the off
position
.
Warning! Always turn the
flame down or switch it off
before you remove the pans
from the burner.
Hob User Manual
10
