Problem
Possible cause
Solution
Temperature cannot be set.
The "FastFreeze function" or "In-
tensiveCooling function" is
switched on.
Switch off "FastFreeze function" or "In-
tensiveCooling function" manually, or
wait until the function resets automat-
ically to set the temperature. Refer to
"FastFreeze function" or "Intensive-
Cooling function".
dEMo appears on the display.
The appliance is in demonstration
mode.
Keep the OK pressed for approxi-
mately 10 seconds until a long sound
is heard and display shuts off for a
short time.
The temperature in the appliance is
too low/too high.
The temperature regulator is not
set correctly.
Set a higher/lower temperature.
The door is not closed correctly. Refer to "Closing the door".
The food products' temperature
is too high.
Let the food products temperature
decrease to room temperature be-
fore storage.
Many food products are stored at
the same time.
Add less food products at the same
time.
The door has been opened often. Open the door only if necessary.
The "FastFreeze function" or "In-
tensiveCooling function" is
switched on.
Refer to "FastFreeze function" or "In-
tensiveCooling function".
There is no cold air circulation in
the appliance.
Make sure that there is cold air circu-
lation in the appliance.
If the advice does not lead to the
desired result, contact the nearest
Authorised Service Centre.
Replacing the lamp
The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Authorised Service
Centre.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to assembly
instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
Fridge Freezer User Manual
22
