Salt
The indicator comes on when the salt
has run out.
1)
The salt indicator can remain on for a
few hours after that salt has been
replenished (assuming the appliance
remains switched on). The operation
of the appliance is not affected.
Rinse aid
The indicator comes on when the
rinse aid has run out.
1)
Multi tab
The indicator comes on when you
activate the Multi tab function.
1) The salt and rinse aid indicators are never on while a
washing programme is running even if filling with salt and/
or rinse aid is necessary.
Function buttons
The following operations can be done with
these buttons:
• The electronic setting of the water softener.
• The cancellation of a washing programme.
• The cancellation of the delay start.
• The activation of the Multi tab function.
• The activation of the rinse aid dispenser.
• Activation or deactivation of the acoustic
signals.
Setting mode
The appliance must be in setting mode
for these operations:
• To start a washing programme.
• To start a delay start.
• To adjust electronically the level of the water
softener.
• To activate the Multi tab function.
• To activate the rinse aid dispenser.
• To activate or deactivate the acoustic signals.
Switch on the appliance. The appliance is
in setting mode when:
• All the programme indicators come on.
Switch on the appliance. The appliance is
not in setting mode when:
• Only one programme indicator comes on.
• The display shows the time of the washing
programme or of the delay start.
– Cancel the programme or the delay start
to go back to the setting mode. Refer to
'Select and start a washing programme'.
Acoustic signals
The acoustic signals indicate:
• The electronic setting of the water softener.
• The end of the washing programme.
• The intervention of an alarm code related to
a malfunction.
Factory setting: acoustic signals activated.
It is possible to deactivate the audible signals,
using the function buttons on the control panel.
Deactivating the acoustic signals
1. Switch on the appliance. Make sure that the
appliance is in setting mode.
2. Press and hold function button (
B
) and
function button (
C
) simultaneously until the
indicators of function buttons (
A
), (
B
) and
(
C
) start to flash.
3. Release function button (
B
) and function
button (
C
).
4. Press function button (
C
), the indicators of
function buttons (
A
) and (
B
) go off while
the indicator of function button (
C
)
continues to flash. The display shows the
current setting of the acoustic signals.
Acoustic signals deactivated
Acoustic signals activated
5. Press function button (
C
) again to change
the setting. The display shows the new
setting.
6. Switch off the appliance to confirm the
operation.
8 Dishwasher
user
manual
