John Lewis JLBIDW 1200 Instruction Manual Download

Page: 10 / 28

Multi-tab function

This appliance is equipped with the Multi-tab function, that allows
the use of the combi detergent tablets with a combined cleaning,
rinsing and salt function (“3 in 1”, “4 in 1” etc...).

Before using the Multi-tab function, check that the
water hardness level in your area complies with
the detergent manufacturers recommendations.

This function can be selected with all washing programmes.

With the selection of this function the inflow of rinse aid and salt
from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid are
deactivated.

Select the Multi-tab function before the set of a washing
programme.

Once selected this option (indicator light illuminated) it will
remain active also for the following washing programmes.

With the use of the Multi-tab function, the cycle durations may
change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.

NOTE: Once the programme is running, the Multi-tab
function can NO longer be changed. If you want to exclude the
Multi-tab function you have to cancel the programme setting
(see chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the Multi-tab
function.
In this case you have to set a washing programme (and desired
options) again.

Activation/deactivation of the Multi-tab function

The dishwasher must be switched off

1. Press the On/Off button.The indicator lights of the

programme selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated this means that a washing programme is set.
The programme must be cancelled: press simultaneously
function buttons 2 and 3 for about 2 seconds, the indicator
light of the set programme button starts flashing.After about 2
seconds the indicator lights of all the programme selection
buttons will illuminate; this means that the set washing
programme has been cancelled and the machine is now in
setting mode.

2. Press simultaneously function buttons 2 and 3, until the

indicator lights of function buttons 1, 2, 3 and 4 start flashing.

3. Press function button 4, the indicator lights of function

buttons 1, 2 and 3 turn off while the indicator light of function
button 4 goes on flashing.

4. Press function button 4 again, the "Multi-tab" indicator light

illuminates, indicating that the "Multi-tab function" is active.

To deactivate the function press function button 4 again, the
indicator light turns off.

5. To memorise the operation, switch off the dishwasher by

pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.

NOTE: if the drying results are not satisfactory we suggest that
you activate the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only be
possible with the Multi-tab function active.

Activation/deactivation of the rinse aid
dispenser

The dishwasher must be switched off

When the rinse aid dispenser has been activated, the
rinse aid indicator light on the control panel is
automatically activated.

1. Press the On/Off button.The indicator lights of the

2. Press simultaneously function buttons 2 and 3, until the

indicator lights of function buttons 1, 2, 3 and 4 start flashing.

3. Press function button 2, the indicator lights of function

buttons 1, 3 and 4 turn off while the indicator light of function
button 2 goes on flashing, the digital display indicates the
current setting.

4. To change the setting, press function button 2 again, the digital

display indicates the new setting.

5. To memorise the operation, switch off the dishwasher by

pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.