![John Lewis JLAFF2010 Instruction Manual Download Page 9](http://html1.mh-extra.com/html/john-lewis/jlaff2010/jlaff2010_instruction-manual_2022185009.webp)
9
2. Remove keeper by rotating it
clockwise (
①
) and then remove the
upper hinge by lifting it up (
②
).
3. Remove the refrigerator compartment
door by lifting it up.
Pass the refrigerator
Pass the refrigerator laterally through the
access door as illustrated.
Door replacement
Once the fridge is through the access door,
remount the fridge doors by following the
door removal instructions in reverse.
Feed water pipe
installation
•
Automatic ice maker operation needs
water pressure of 147~834kPa
(1.5~8.5kgf/cm
2
) (The pressure is correct
when an instant paper cup (180cc) is filled
in 3 sec.).
•
If water pressure does not reach the
rating 147kPa(1.5kgf/cm
2
) or below, it
is necessary to purchase a separate
pressure pump for normal automatic icing
and cool water feed.
•
Keep the total length of the feed water
pipe tube within 8m and be careful that
the tube does not bend. If the tube is
8m or longer it may cause water feed
problems owing to the drain water
pressure.
•
Install the feed water pipe tube at a place
free from heat.
•
Connect to drinking water supply only.
• Refer to instructions with water filter kit
for installation.
Lower cover
Enough for
water feed pipe tube to
be completly pulled out
Connection
wires
Upper hinge
Keeper
Lower hinge
Lower cover
Feed water tube
Connection
wires
Earth line
Upper
hinge
Hinge
cover
Keeper
Upper hinge
Lower cover
Enough for
water feed pipe tube to
be completly pulled out
Connection
wires
Upper hinge
Keeper
Lower hinge
Lower cover
Feed water tube
Connection
wires
Earth line
Upper
hinge
Hinge
cover
Keeper
Upper hinge
Lower cover
Enough for
water feed pipe tube to
be completly pulled out
Connection
wires
Upper hinge
Keeper
Lower hinge
Lower cover
Feed water tube
Connection
wires
Earth line
Upper
hinge
Hinge
cover
Keeper
Upper hinge
OM.indd 9
2011-01-27 07:38:56