background image

Care and Maintenance

Safety Instructions

This Genoa Storage Bed should be cleaned using a soft damp cloth and dried immediately.

Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently 

damage the surface.

Do not use detergents and do not rub as this can cause permanent damage.

Always protect your bed from direct sunlight as this may accelerate the natural on going discolouration

process.

Screws holding together the bed frame should be tightened regularly.

Please retain this information leaflet for future reference.

This product complies with BS 1725:98

If you require any additional information or have any issues with this product please call 

the John Lewis Helpline on 01244 689949 or email [email protected]

John Lewis Partnership 171 Victoria Street, London , SWIE 5NN.

www.johnlewis.com

Never drag furniture when moving it, always lift it.

periodically check all fixings to ensure none have come loose and re-tighten where necessary.

Please take care when handling or moving the furniture as careless handling may cause damage or injury.

Furniture can be dangerous if incorrectly installed. Any assembly should be carried out by competent adult.

No liability will be accepted for damage or injury caused by incorrectly insalled or assembled furniture.

During assembly children should be kept away from the product due to possible risk of injury. 

Do not use this item if any components are missing or damaged.

It is recommended that care is taken when moving heavy objects to a new location to avoid 

personal injury or damage to the furniture. Please be careful to retain all fitting when doing this. 

Summary of Contents for Genoa 2 Drawer Storage 810/84001









Reviews: