John Lewis Elementary 324 30602, Assembly Instructions Manual

Page: 3 / 13

Warnings
Keep small parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Care should be taken that no screws are loose because a child could trap
parts of their body, or clothing (e.g. strings, necklaces, ribbons, dummies, etc)
which could pose a risk of strangulation.
Ensure that the wall bracket is used to securely attach the change table to the wall to prevent tipping.
Any additional or replacement parts must only be obtained from John Lewis & Partners.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as over tightening and panel failure
may occur.
During assembly children should be kept away from the product due to possible risk of injury.
Do not use this item if any components are missing or damaged.