background image

9

21/07/20

Care guide

How to care for your glass and metal furniture

For glass elements use glass cleaner or soapy water for cleaning, do not use anything abrasive as this may damage 
the surface of the product. 

Note: Glass can scratch in normal use therefore please protect surfaces from 

scratches and marks by using mats and coasters.

Protect the metal elements from spillage, sunlight and heat.  A slightly damp cloth is the best cleaning agent for the 
material.  Dry and polish with a non abrasive soft cloth.
Do not use any abrasive cleaner or harsh detergent on the metal elements as this can damage the surface.  Avoid 
spilling or dropping crumbs of food with a high fat content on the surface as this can permanently mark the metal.

Please note: natural variations in the colour and veining of the marble bases make each piece subtly unique. 
Surfaces which are subject to prolonged contact with water or other liquids may suffer damage.
Marble should be cleaned using only a damp cloth and neutral detergents and dried immediately with a dry clean 
cloth.
It is not advisable to use alkaline, solvent, and abrasive products.

Safety instructions

Never drag furniture when moving it, always lift it.
Periodically check all fixings to unsure none have come loose and retighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competant person. No 
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
It is recommended that before moving heavy objects to a new location they are completely dis-assembled to avoid 
personal injury or damage to the furniture.  Please be careful to retain all fittings when doing this.

Glass furniture warning

Do not place very hot or very cold items glass surface(s) unless adequately thick table mats are used to prevent 
such items from coming into contact with the glass.
Do not sit or stand upon glass surface(s) 
Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed items.
If the glass is chipped or broken stop using the product and consult the manufacturer or supplier.

Marble furniture warning

Please note: natural variations occur in the marble base with variations in colour and veining, making each piece 
subtly unique.

The marble is to be cleaned using only a damp cloth and dried immediately with soft dry cloth.  Do not use 
abrasives or chemicals.
Surfaces which are subject to prolonged contact with water or other liquids may suffer damage.

Warning! Marble surface may scratch.

Retain these instructions for future reference.

John Lewis Partnership
171 Victoria  Street
London SW1E 5NN
johnlewis.com

Summary of Contents for 836 08903











Reviews: