background image

 

 

 

Care and Maintenance  

 

 

Wood Furniture 
 

This product is made from FSC Eucalyptus and has been painted and sealed with PU paint, suitable for 
outside use.  
 
Wood is a natural material and its colour can vary. Wood absorbs and releases moisture so differant 
types of weather will greatly influence the long term look of this product. 
 
Wood displays different grain patterns depending on which way they cut - for example, the ‘medullary 
ray’ which can appear on oak furniture is a mark of good quality timber - these are just characteristics of 
the natural beauty of the wood. Some furniture is also deliberately aged and rustic. 
 
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade 
from items that have been previously purchased. 
 

How to Care for your Wood Furniture 

 
To clean this product you can wash it with a mild detergent, taking care not to scrub too hard to avoid 

scratching. Only use a low pressure hose to rinse it, high pressure sprays can encourage the paint to 
flake off. Make sure that the product is thoroughly dried with a soft lint free cloth each time you clean it. 
 
Clean up any accidental food or drink spills as quickly as possible to prevent staining. 
 

To extend the product life

 and appearance it is advisable to store the furniture in a cool dry place 

over winter. Ensure that the furniture is clean and completely dry before putting in to storage. Do NOT 
enclose the product in a plastic or other non permeable material as this promotes the growth of mildew 
and mould. Cover it with a dust sheet or furniture cover allowing the air to circulate around it. 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 820/31101






Reviews: